• Description
  • Programmes
  • Contact

Sectors: Industry, Innovation, Research, Transport

Beneficiaries: Administrations States, Corporations, International Organisation, Local and Regional authorities, Research centres, SMEs

Regions: Balkans, Candidate countries, Developing countries, European Economic Area, European Union, Mediterranean countries, New Independant States

Category: Call for proposals

References:

To view this information, please connect.

Responsible: European Commission

Amorce:

This call aims to attract investments in Europe through advanced research and full-scale demonstration actions in green technology for air transport in line with the strategic research agenda identified, with the involvement of all public and private stakeholders and a time horizon that runs up to 2050

Priorities and funded actions:

TOPICS
Open:
– JTI-CS2-2017-CfP07-AIR-01-30: Finalize and improve the manufacturing of the model of a laminar wing configuration bizjet (LSBJ)
– JTI-CS2-2017-CfP07-AIR-01-31: Evaluation of the benefits of a laminar nacelle and a laminar HTTP installed on a bizjet configuration
– JTI-CS2-2017-CfP07-AIR-01-32: Prototype Tooling for manufacturing composite stiffened panel for a business jet lower wing
– JTI-CS2-2017-CfP07-AIR-01-33: Flexible RTM tool concept for composites with spring back adjustments capabilities
– JTI-CS2-2017-CfP07-AIR-01-34: Development of innovative aluminium filler wire based manufacturing of aeronautic components and structures
– JTI-CS2-2017-CfP07-AIR-01-35: Development of an eco-friendly selective stripping for exterior surfaces of airframe structures
– JTI-CS2-2017-CfP07-AIR-01-36: Hybrid Aircraft Seating Manufacturing & Testing
– JTI-CS2-2017-CfP07-AIR-02-51: Light weight, certifiable airframe structures through combination with high performance materials
– JTI-CS2-2017-CfP07-AIR-02-52: Helicopter carbon composite engine deck
– JTI-CS2-2017-CfP07-AIR-02-53: Innovative & Flexible pilot plant Means for highly integrated AFP infusion wing box aiming at flying demonstrator manufacturing
– JTI-CS2-2017-CfP07-AIR-02-54: Seals for FTB#2 Wing with Additive Manufacturing Technologies
– JTI-CS2-2017-CfP07-AIR-02-55: Thermal conductive coating providing self-limitation of heating power at a selected temperature level
– JTI-CS2-2017-CfP07-AIR-02-56: Advanced Integrated Testing Methods development
– JTI-CS2-2017-CfP07-AIR-02-57: Tests and Modelling for reliability characterization and robustness of optoelectronic transceivers for optical SHM systems
– JTI-CS2-2017-CfP07-AIR-02-58: Optimization of hybrid joining (Refill Friction Stir Spot Welding + adhesive bond) for increasing mechanical properties and corrosion protection of the joints [SAT]
– JTI-CS2-2017-CfP07-AIR-02-59: Breakthrough design concept solutions and technologies for Regional Aircraft Cabin Interiors innovative configuration
– JTI-CS2-2017-CfP07-ENG-01-23: Improvement of high speed low pressure turbine performance through reduction of secondary effects
– JTI-CS2-2017-CfP07-ENG-01-24: Crowned spline surface treatment and modelling 
– JTI-CS2-2017-CfP07-ENG-01-25: Gearbox bearing design & testing
– JTI-CS2-2017-CfP07-ENG-01-26: Innovative acoustic fan frame liners technologies for UHBR
– JTI-CS2-2017-CfP07-ENG-01-27: Composite process modelling and net-shape, complex geometry RTM tool design
– JTI-CS2-2017-CfP07-ENG-01-28: Innovative HPC Flow Treatment Technologies: Design & Experimental Validation Using Advanced Measurement Techniques
– JTI-CS2-2017-CfP07-ENG-01-29: Characterization of the resistance of TiAl turbine blades to impact
– JTI-CS2-2017-CfP07-ENG-01-30: Numerical and experimental study of high speed radial flow compressors
– JTI-CS2-2017-CfP07-ENG-01-31: Unsteady pressure sensor for high pressure and hot environment
– JTI-CS2-2017-CfP07-ENG-02-06: Experimental investigation of aerodynamic and heat transfer properties for a next generation turbine frame and nozzle
– JTI-CS2-2017-CfP07-ENG-02-07: Aircraft design and noise assessment for a regional application
– JTI-CS2-2017-CfP07-ENG-02-08: Optimization of TiAl CALPHAD databases of respective material systems
– JTI-CS2-2017-CfP07-ENG-03-20: Emissions prediction for very large bypass ratio turbofans
– JTI-CS2-2017-CfP07-ENG-03-21: Novel Bearings
– JTI-CS2-2017-CfP07-ENG-03-22: Development and validation of a Powder HIP route for the manufacture of the UltraFan® Demonstrator IP Turbine casing from high temperature material allowing product enhancements at significantly lower costs and environmental footprint
– JTI-CS2-2017-CfP07-FRC-01-16: Full scale High speed aerodynamics characteristics of the Civil Tilt Rotor
– JTI-CS2-2017-CfP07-FRC-01-17: Innovative flotation methodologies (system) for tilt rotor
– JTI-CS2-2017-CfP07-LPA-01-36: Innovative design for reliable and low weight power gearbox planet bearings
– JTI-CS2-2017-CfP07-LPA-01-37: Next Generation Low Pressure Turbine airfoils by ALM
– JTI-CS2-2017-CfP07-LPA-01-38: Advance Nacelle Aerodynamic Optimisation
– JTI-CS2-2017-CfP07-LPA-01-39: Skin Friction measurements on a real aircraft and Fiber-optics based pressure measurements for aircraft applications
– JTI-CS2-2017-CfP07-LPA-01-40: Novel mechanical drive disconnect for embedded Permanent Magnet machines
– JTI-CS2-2017-CfP07-LPA-01-41: Advanced manufacturing for MW range power dense electrical machines for aerospace applications
– JTI-CS2-2017-CfP07-LPA-01-42: Development of power electronic technologies for >1kV aerospace applications
– JTI-CS2-2017-CfP07-LPA-01-43: Pulsating Heat Pipe (PHP) modelisation & characterisation
– JTI-CS2-2017-CfP07-LPA-01-44: Quick Disconnect System
– JTI-CS2-2017-CfP07-LPA-01-45: High Performance Generation Channel Integration
– JTI-CS2-2017-CfP07-LPA-01-46: Intelligent Power Module
– JTI-CS2-2017-CfP07-LPA-02-22: Development of a full size automated plant system for fuselage longitudinal and circumferential joints
– JTI-CS2-2017-CfP07-LPA-03-13: Design and development of smart sensors for detection of human cognitive states implementable in cockpit environment
– JTI-CS2-2017-CfP07-LPA-03-14: Innovative validation methods and tools for FMS
– JTI-CS2-2017-CfP07-REG-01-11: Full scale innovative composite frames and shear ties for Regional Aircraft Fuselage barrel on-ground demonstrators.
– JTI-CS2-2017-CfP07-REG-01-12: Full scale innovative composite doors, surrounds and sub-structure for Regional Aircraft Fuselage barrel on-ground demonstrators
– JTI-CS2-2017-CfP07-REG-01-13: Full scale Innovative composite windows frames for Regional Aircraft Fuselage barrel on-ground demonstrators
– JTI-CS2-2017-CfP07-REG-01-14: Full scale innovative composite pax and cargo floor grids for Regional Aircraft Fuselage barrel on-ground demonstrators
– JTI-CS2-2017-CfP07-REG-01-15: Innovative Primary and Secondary Electrical Distribution Network for Regional A/C
– JTI-CS2-2017-CfP07-REG-02-04: Technological readiness at the operational level for additive manufacturing in primary structure and large size components
– JTI-CS2-2017-CfP07-SYS-01-07: Development of a system for pilot eye gaze and gesture tracking in the cockpit environment
– JTI-CS2-2017-CfP07-SYS-01-08: Application of machine learning techniques to enableenhance aircraft performances database and facilitate mission optimization objectives
– JTI-CS2-2017-CfP07-SYS-01-09: Obstruction detection Sensor for Modular surveillance active Trajectory check improvement
– JTI-CS2-2017-CfP07-SYS-01-10: Development of 94 GHz (W-band) Radar Components
– JTI-CS2-2017-CfP07-SYS-02-36: Advanced Load Sensing technology for aerospace applications
– JTI-CS2-2017-CfP07-SYS-02-37: Development of a new backup electronics unit for Smart Inceptor
– JTI-CS2-2017-CfP07-SYS-02-38: Ergonomic impact and new functions induced by Active Inceptor integration in cockpits
– JTI-CS2-2017-CfP07-SYS-02-39: Development of a High Voltage Lithium Battery
– JTI-CS2-2017-CfP07-SYS-02-40: Development of low insertion/extraction force electrical connecting device
– JTI-CS2-2017-CfP07-SYS-02-41: Development of methodology and tools based on advanced statistics applied to Electro Magnetic Compatibility analysis of cable harnesses in aeronautics
– JTI-CS2-2017-CfP07-SYS-02-42: Development of low rating and high power HVDC optimized fuses
– JTI-CS2-2017-CfP07-SYS-02-43: Design and Development of a high temperature HVDC busbar
– JTI-CS2-2017-CfP07-SYS-02-44: Cabin air quality and passenger comfort
– JTI-CS2-2017-CfP07-SYS-02-45: Development of a Foreign Object Debris (FOD) protection device applied to an electrical ECS fresh air inlet.
– JTI-CS2-2017-CfP07-SYS-03-13: Electro-Mechanical Brake actuation for Small Aircraft [SAT]
– JTI-CS2-2017-CfP07-SYS-03-14: Development of Digital Integrated Multifunction Probe for Air Data Sensing [SAT]
– JTI-CS2-2017-CfP07-SYS-03-15: Super hydrophobic and erosion resistant coating for turbine scroll and downstream pipe
– JTI-CS2-2017-CfP07-SYS-03-16: Aircraft mission modelling: ground and flight operations
– JTI-CS2-2017-CfP07-TE2-01-06: TE Technology diffusion model

For more information: Click here